Single Board Computer, model name: NP101-D16C, form factor: Mini ITX
Technical Specifications
| CHIPSET | Intel® chipset |
| Intel® 945GSE Graphics Memory Controller Hub (GMCH) | |
| Intel® 82801GBM I/O Controller Hub (ICH7M) | |
| SYSTEM MEMORY | One 240-pin DDR2 DIMM socket |
| Maximum memory supports up to 2GB | |
| Supports 400MHz and 533MHz DDR2 SDRAM | |
| BIOS | Award BIOS |
| 8Mbit SPI interface BIOS | |
| ONBOARD GRAPHICS FEATURES | 133/166MHz internal graphics core render frequency at 1.05V core voltage |
| One SDVO port (Port B) | |
| One SDVO port (Port B) | |
| Supports 18-bit dual-channel LVDS | |
| Supports CRT resolutions up to SXGA+ | |
| ONBOARD LAN FEATURES | Two Realtek RTL8111C PCI Express Gigabit controllers |
| Supports 10Mbps, 100Mbps and 1Gbps data transmission | |
| IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant | |
| IDE INTERFACE | Bus Master IDE (PATA) controller |
| Supports up to two IDE devices | |
| Ultra ATA 100/66/33 | |
| LAN | Two Marvell 88E8056 PCI Express Gigabit controllers |
| Supports 10Mbps, 100Mbps and 1Gbps data transmission | |
| IEEE 802.3 (10/100Mbps) and IEEE 802.3ab (1Gbps) compliant | |
| SERIAL ATA | Two SATA ports with independent DMA operation supported on ports 0 and 2 |
| Two-mode operation supports legacy mode using I/O space or an AHCI mode using memory space | |
| SATA and PATA can be used in a combined function mode (When SATA is used with PATA, AHCI mode is not supported.) | |
| REAR PANEL I/O PORTS | SATA and PATA can be used in a combined function |
| mode (When SATA is used with PATA, AHCI mode is not | |
| supported.) | |
| 1 4-pin DC 12V jack or 4-pin ATX 12V power connector (optional) | |
| 12V power is optional | |
| 1 DB-9 serial port | |
| 1 DB-15 VGA port | |
| 2 RJ45 LAN ports | |
| 4 USB 2.0/1.1 ports | |
| Mic-in, line-in and line-out | |
| I/O CONNECTORS | 2 connectors for 4 additional external USB 2.0/1.1 ports |
| 1 connector for an additional external serial port | |
| 1 speaker-out connector with amplifying feature | |
| 1 SDVO connector for DFI NP1-LVDS (24-bit / 2 channels external LVDS) or NP1-DVI (external DVI-D) daughterboard | |
| 1 LVDS LCD panel connector | |
| 1 LCD/inverter power connector | |
| 1 DIO connector | |
| 1 front audio connector for line-out and mic-in jacks | |
| 1 CD-in internal audio connector | |
| 1 S/PDIF connector | |
| 2 Serial ATA connectors | |
| 1 44-pin IDE connector | |
| 1 FDD connector (FPC type) - optional | |
| 1 front panel connector | |
| 1 chassis intrusion connector | |
| 1 fan connector | |
| 1 4-pin power connector for the SATA drive | |
| PCB | |
| PROCESSOR |
|
|
