SBC cPCI  

CPC503

Solution provider for Embedded and Industrial PC

CPC503

SBC EMBEDDED

Intel Core 2nd Gen/ 3rd Gen , QM67 chipset, DDR3 SDRAM 1333 up to 4 GB, DDR3L SDRAM 1600 MHz up to 8 GB, 4 LAN, 4 USB 2.0, 2 USB 3.0



General Features

– CPC503-01, CPU Intel Core 2nd Gen
i7-2715QE
i7-2655LE
i7-2610UE
– CPC503-02, CPU Intel Core 3 rd Gen
i7-3612QE
i7-3555LE
i7-3517UE
– QM67 chipset
– DDR3 SDRAM 1333 MHz with ECC up to 4 GB, dual channel
– DDR3L SDRAM 1600 MHz with ECC up to 8 GB, dual channel
– 4 LAN, 4 USB 2.0, 2 USB 3.0

Technical Features
For CPC503-01, CPU Intel Core 2nd Gen ( 2/4 Cores)Core i7-2715QE 6 MB 4C 2.1 GHz SV 45 W
Core i7-2655LE 4 MB 2C 2.2 GHz LV 25 W
Core i7-2610UE 4 MB 2C 1.5 GHz ULV 17 W
For CPC503-02, CPU Intel Core 3 rd Gen ( 2/4 Cores)Core i7-3612QE 6 MB 4C 2.1 GHz SV 35 W
Core i7-3555LE 4 MB 2C 2.5 GHz LV 25 W
Core i7-3517UE 4 MB 2C 1.7 GHz ULV 17 W
PCH QM67 chipset (QM77)Highly integrated interface controller including standard peripherals of IBM PC AT platform
RAMDDR3 SDRAM 1333 MHz with ECC up to 4 GB, dual channel, soldered (for CPC503-01)
DDR3L SDRAM 1600 MHz with ECC up to 8 GB, dual channel, soldered (for CPC503-02)
Video-outputDVI-connector (VGA [2048×1536@75 Hz], DVI-D[1920×1200@60 Hz] routed to the front panel
DisplayPort interface (resolution up to 2560×1600@60 Hz) routed to the front panel
DisplayPort interface (resolution up to 2560×1600@60 Hz) routed to RIO
Embedded Display Port interface, routed to RIO
Simultaneous operation of two interfaces is possible (for CPC503-01)
Simultaneous operation of three interfaces is possible (for CPC503-02)
PCI busRouted to Compact PCI J1/J2 connectors
64 bit/ 66 MHz
Implemented on PCI-E bridge ->PCI-X PI7C9X130
Operation in a non-system slot (Non-Transparent Bridge mode)
LPC busRouted to P16 XMC connector
Routed to RIO
PCI-E bus (for CPC503-01)Support of PCI-E 2.0 (up to 5 GT/s), routed to P15 XMC connector, supporting up to x8 devices
PCI-E 1.0 (up to 2.5 GT/s) routed to CPCI J3/P3 connector, supporting up to X4 devices
XMC, compatible with ANSI/VITA 42.3 specification PCI-E bus (for CPC503-02)
PCI-E 3.0 (up to 8 GT/s) routed to P15 XMC connector, supporting up to x8 devices
PCI-E 2.0 (up to 5 GT/s) routed to CPCI J3/P3 connector, supporting up to X4 devices
XMC, compatible with ANSI/VITA 42.3 specification
SMBUSCompatible with 2.0 specification
Speed up to 100 Kb/s
GPIO interface8x lines
Routed to RIO
FLASH BIOS64 MB SPI-Flash
NAND FLASH-driveIntegrated four channel NAND controller (up to 100 MB/s)
NAND soldered: 4 GB (CPC503-01), 8 GB (CPC503-02)
Connected to SATA6 interface
SATA interfaceSingle interface routed to P16 XMC
Single interface is used for the connection of HDD 1.8″ (installed on board)
Two interfaces, routed to RIO
SPI interfaceSupport of FRAM
Frequency up to 25 MHz
4x LAN 10/100/1000 Mb ports on PCI-E x4 Gen22 × switchable between P16 XMC and RIO
2 × routed to the front panel
Support of PICMG 2.16 standard
Implementation of a server network adapter
USB portsSupport of USB 1.1 (12 Mb/s), USB 2.0 (480 Mb/s)
Connection of up to 4x devices via connectors on the front panel
2 × interfaces are routed to P16 XMC
2 × USB 3.0 interfaces are routed to P16 XMC (for CPC503-02)
6 × interfaces are routed to RIO
FRAM32 KB: 1 KB for storing Bios Setup settings and 31 KB for saving user data
Implemented on SPI bus
RTCLithium battery CR2032 (3 V) power supply
Audio supportHD Audio interface routed to P16 XMC and RIO connectors
Watchdog timerInternal, programmable watchdog
Hardware monitorImplemented via PECI/SMBUS interfaces
Monitoring of 3 supply voltages
Monitoring of CPU temperatures
Monitoring of PCB temperature.
Support of XMC/PMC extension boardsSupport of a single XMC/PMC extension board
PCI bus-X 64 bit/133 MHz routed to P1-P4 PMC connectors
(ANSI/VITA 39, PCI-X on PMC)PMC I/O P4 routed to RIO (PICMG 2.0)
PCI-E bus x8 Gen2 routed to P15 XMC connector (ANSI/VITA 42.3, XMC PCI Express Protocol Standard) (for CPC503-01)
PCI-E bus x8 Gen3 routed to P15 XMC connector (ANSI/VITA 42.3, XMC PCI Express Protocol Standard) (for CPC503-02)
Additional interfaces (1 × SATA, 2 × USB, LPC, HD-Audio, 2 × Ethernet) are routed to P16 XMC connector. For CPC503-02: 2xUSB 3.0
LEDsBoard start diagnostics LED / “Hot Swap” LED
SATA addressing LED
Two programmable LEDs (user LEDs)
OS compatibilityLinux 2.6
QNX 6.5
Windows Embedded Standart 7
PowerSupply voltage +5 V, +3.3 V, +12 V, –12 V from CPCI bus
MechanicalSingle shock/vibration resistance: 30g/2g
Dimensions: 266,1 mm × 212,5 mm × 21 mm (with R1 heat-sink)
Wight: with R1 heat-sink: no more than 0,700 kg
MTBF: no less than 60 000 hours
EnvironmentalOperating temperature range
Industrial: from –40°C to +85°C
Commercial: from 0°C to +70°C
Resistance to cyclic damp heat in case of conformal coating: at the ambient temperature of +(55 ± 2)°C, relative humidity (93 ± 3)%

Contact us for more information about cPCI CPC503